@article { ISI:000266263000034, title = {Liquid phase oxidation of p-cresol over cobalt saponite}, journal = {Topics in Catalysis}, volume = {52}, number = {6-7}, year = {2009}, month = {JUN}, pages = {784-788}, publisher = {SPRINGER/PLENUM PUBLISHERS}, address = {233 SPRING ST, NEW YORK, NY 10013 USA}, abstract = {

Liquid phase oxidation of p-cresol was carried out over a Co-saponite catalyst in a temperature and pressure range of 333-393 K and 20-827 kPa, respectively in n-propanol. Co-saponites with varying cobalt content (5-30\%) were prepared and screened among which 13\% Co-saponite gave the highest conversion of 92\% of p-cresol with 92\% selectivity to p-hydroxybenzaldehyde without formation of any non-oxidation products.

}, keywords = {Co-saponite, Liquid phase oxidation, p-Cresol, p-Hydroxybenzaldehyde, XPS}, issn = {1022-5528}, doi = {10.1007/s11244-009-9199-z}, author = {Kshirsagar, Vikas S. and Garade, Ajit C. and Patil, Kashinath R. and Shirai, Masayuki and Rode, Chandrashekhar V.} } @article { ISI:000279333000002, title = {Structure-activity studies of dodecatungstophosphoric acid impregnated bentonite clay catalyst in hydroxyalkylation of p-cresol}, journal = {Catalysis Communications}, volume = {11}, number = {11}, year = {2010}, month = {JUN}, pages = {942-945}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Bentonite clay impregnated with dodecatungstophosphoric acid (20\% DTP/BNT) showed an excellent activity, selectivity and stability [95\% product yield with 94\% selectivity to 2, 2{\textquoteright}-methylenebis (4-methylphenol), DAM] for the hydroxyalkylation of p-cresol with formaldehyde at 353 K and for a mole ratio of 5. Ammonia-TPD results showed that an increase in total concentration of acid sites from 4.9 of parent bentonite to 11.6 micromoles per surface area NH(3) (mu molS(-1) NH(3)) of 20\% DTP/BNT was due to a strong interaction of protons of bulk DTP with surface hydroxyl groups of BNT as evidenced by (31)P NMR studies. (C) 2010 Elsevier B.V. All rights reserved.

}, keywords = {(31)P CPMAS NMR, Bentonite, Hydroxyalkylation, p-Cresol, surface modification}, issn = {1566-7367}, doi = {10.1016/j.catcom.2010.04.008}, author = {Garade, Ajit C. and Kshirsagar, V. S. and Jha, Ajay and Rode, C. V.} } @article { ISI:000328665300008, title = {Effect of SnO2/Al2O3 ratio of Si-based MFI on its acidity and hydrophobicity: application in selective hydroxyalkylation of p-cresol}, journal = {Catalysis Communications}, volume = {44}, number = {SI}, year = {2014}, month = {JAN}, pages = {29-34}, publisher = {ELSEVIER SCIENCE BV}, type = {Article}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Silica based MR type molecular sieves with various SnO2/Al2O3 ratios were synthesized from gels having molar compositions SiO2:xSnO(2):yAl(2)O(3):0.23(TPA)(2)O:35H(2)O where 0 \<= x \<= 0.02 and 0 \<= y \<= 0.01. Recyclable, Al-free Sn-MFI catalyst showed 31\% conversion of formaldehyde with 100\% selectivity to 2,2{\textquoteright}-methylenebis(4-methylphenol) in hydroxyalkylation of p-cresol with formaldehyde on account of moderate acidity and higher hydrophobicity. (C) 2013 Elsevier B.A. All rights reserved.

}, keywords = {Al-27 MAS NMR, Hydroxyalkylation, Molecular sieves, p-Cresol, Stannosilicate}, issn = {1566-7367}, doi = {10.1016/j.catcom.2013.08.002}, author = {Garade, Ajit C. and Malwadkar, A. V. and Niphadkar, P. S. and Jha, Ratnesh Kumar and Joshi, P. N. and Rode, C. V.} }