@article { ISI:000326320000017, title = {Efficient, stable, and reusable silicoaluminophosphate for the one-pot production of furfural from hemicellulose}, journal = {ACS Catalysis}, volume = {3}, number = {10}, year = {2013}, month = {OCT}, pages = {2299-2303}, publisher = {AMER CHEMICAL SOC}, address = {1155 16TH ST, NW, WASHINGTON, DC 20036 USA}, abstract = {

Development of stable, reusable, and water tolerant solid acid catalysts in the conversion of polysaccharides to give value-added chemicals is vital because catalysts are prone to undergo morphological changes during the reactions With the anticipation that silicoaluminophosphate (SAPO) catalysts will have higher hydrothermal stability, those were synthesized, characterized, and employed in a one-pot conversion of hemicellulose. SAPO-44 catalyst at 170 degrees C within 8 h could give 63\% furfural yield with 88\% mass balance and showed similar activity up to at least 8 catalytic cycles. The morphological studies revealed that SAPO catalysts having hydrophilic characteristics are stable under reaction conditions.

}, keywords = {furfural, Hemicellulose, hydrophilicity, SAPO, water-tolerant catalyst, zeolite}, issn = {2155-5435}, doi = {10.1021/cs400495j}, author = {Bhaumik, Prasenjit and Dhepe, Paresh Laxmikant} } @article { ISI:000354137000012, title = {Effects of careful designing of SAPO-44 catalysts on the efficient synthesis of furfural}, journal = {Catalysis Today}, volume = {251}, year = {2015}, note = {7th Tokyo Conference on Advanced Catalytic Science and Technology (TOCAT), Kyoto, JAPAN, JUN 01-06, 2014}, month = {AUG}, pages = {66-72}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Considering the growing importance of furfural, it is necessary to develop a robust solid acid catalyst for the conversion of xylan (hemicelluloses) into furfural in a one-pot method. In this study, the effects of various components (Si, Al and P) and crystallization time on the preparation of acidic materials and their properties are extensively described. It is seen that with the increase in crystallization time (0, 48, 96, 176 h) during the synthesis of silicoaluminophosphate (SAPO-44), materials morphology changes from amorphous to AFI to CHA and the best activity for furfural synthesis (82\%) from xylan was observed with SAPO-44 catalyst aged for 176 h. Since, acidity in the SAPO-44 is guided by the incorporation of Si in the ALPO framework, study on Si molar concentration (0.8, 1.0, 1.2, 1.4 and 1.6) in SAPO-44 was carried out and it was observed that SAPO-44 having 1.0 mole of Si content is the best catalyst for the xylan/xylose conversion to furfural. Catalyst structure-activity correlation is thoroughly defined with the help of several physico-chemical properties. (C) 2014 Elsevier B.V. All rights reserved.

}, keywords = {Biomass, furfural, Hemicellulose, SAPO-44, Xylose}, issn = {0920-5861}, doi = {10.1016/j.cattod.2014.10.042}, author = {Bhaumik, Prasenjit and Dhepe, Paresh Laxmikant} } @article { ISI:000370664300002, title = {Solid acid catalyzed synthesis of furans from carbohydrates}, journal = {Catalysis Reviews-Science and Engineering}, volume = {58}, number = {1}, year = {2016}, month = {JAN}, pages = {36-112}, publisher = {TAYLOR \& FRANCIS INC}, type = {Article}, address = {530 WALNUT STREET, STE 850, PHILADELPHIA, PA 19106 USA}, abstract = {

The alternative feedstock, biomass (particularly lignocelluloses), having the profuse availability, is promising for the synthesis of several value-added chemicals which are currently obtained from fossil feedstock. In this article, the synthesis of two extremely significant furan chemicals viz. furfural and 5-hydroxymethylfurfural (HMF) are discussed. In the synthesis of furans from biomass, numerous challenges, i.e., use of edible sugars as substrates, selectivity to furans, their isolation in pure form, reuse of catalyst, environmental issues, etc., are perceived and in the recent past researchers tried to resolve those by developing advance methodologies. This article comprehensively summarizes the latest progress made in the above-mentioned areas and also provides commentary on the analyses of results, rationale for observed activity and mechanisms, etc. It also discusses future aspects of this work.

}, keywords = {Biomass conversion, carbohydrates, cellulose, furans, furfural, hemicelluloses, HMF, solid acid catalyst}, issn = {0161-4940}, doi = {10.1080/01614940.2015.1099894}, author = {Bhaumik, Prasenjit and Dhepe, Paresh Laxmikant} }