@article { ISI:000263332200056, title = {Polyimides based on aromatic diisocyanates containing pendent flexible alkoxy chains and aromatic dianhydrides: synthesis, characterization, and liquid-crystal alignment properties}, journal = {Journal of Applied Polymer Science}, volume = {112}, number = {1}, year = {2009}, month = {APR}, pages = {461-472}, publisher = {JOHN WILEY \& SONS INC}, address = {111 RIVER ST, HOBOKEN, NJ 07030 USA}, abstract = {

Four new aromatic diisocyanates containing pendent flexible alkoxy chains, namely, 5-butyloxy-1,3-phenylenediisocyanate, 5-octyloxy-1,3-phenylenediisocyanate, 5-dodecyloxy-1,3-phenylenediisocyanate, and 5-hexadecyloxy-1,3-phenylenediisocyanate, were synthesized by Curtius rearrangement of the corresponding 5-alkoxy-1,3-phenylene diacylazides. These diisocyanates were each polycondensed with three commercially available aromatic dianhydrides: 4,4{\textquoteright}-oxydiphthalic anhydride, 3,3{\textquoteright},4,4{\textquoteright}-(hexafluoroisopropylidene) diphthalic anhydride, and 3,3{\textquoteright},4,4{\textquoteright}-benzophenonetetracarboxylic dianhydride-in benzonitrile in the presence of 1,4-dizabicyclo[2.2.2]octane as a catalyst to obtain a series of polyimides with inherent viscosities in the range 0.16-0.43 dL/g. Except for 3,3{\textquoteright},4, 4{\textquoteright}-benzophenonetetracarboxylic dianhydride based polyimides, all of the polyimides were found to be soluble in dichloromethane, m-cresol, 1-methyl-2-pyrrolidinone, tetra-chloroethane, and pyridine either at room temperature or on heating and could be cast into tough, flexible, transparent films from a solution in in-cresol or tetra chloroethane. X-ray diffractograms revealed that the polyimides with longer alkoxy chains had layered structures. The glass-transition temperature of the polyimides containing pendent flexible alkoxy chains were in the range 159-246 degrees C as measured by differential scanning calorimetry. The temperature for the 10\% weight loss of the polyimides was in the range 410-460 degrees C in a nitrogen atmosphere, which indicated good thermal stability. A pretilt angle of 2.97 degrees was observed for the polyimide derived from 5-octyloxy-1,, 3-phenylenediisocyanate and 4,4{\textquoteright}-oxydiphthalic anhydride. (c) 2009 Wiley Periodicals, Inc. J Appl Polym Sci 112: 461-472, 2009

}, keywords = {High performance polymers, polyimides, Thermal properties}, issn = {0021-8995}, doi = {10.1002/app.29388}, author = {Sarkar, Anjana and Halhalli, Mahadeo R. and Kulkarni, Arun D. and Wadgaonkar, Prakash P.} } @article { ISI:000291605900010, title = {Polyamides containing quinoxaline moiety}, journal = {Journal of Polymer Research}, volume = {18}, number = {4}, year = {2011}, month = {JUL}, pages = {549-557}, publisher = {SPRINGER}, address = {VAN GODEWIJCKSTRAAT 30, 3311 GZ DORDRECHT, NETHERLANDS}, abstract = {

A new quinoxaline moiety containing aromatic diamine; 2,3-bis[4-(4-aminophenoxy)phenyl]quinoxaline (APQ) was synthesized starting from 4-methoxybenzaldehyde and was characterized by IR, (1)H, (13)C NMR and Mass spectrometry. Five new polyamides were synthesized by polycondensation of various aliphatic diacid / aromatic diacids namely, azelaic acid, bis(4-carboxyphenyl)dimethylsilane, 4,4{\textquoteright}-oxybis(benzoicacid), isophthalic acid and terephthalic acid with APQ by Yamazaki{\textquoteright}s phosphorylation method using triphenyl phosphite as condensing agent. The polyamides were characterized by IR spectroscopy, solubility tests, inherent viscosity, X-ray diffraction technique, differential scanning colorimetry and thermogravimetric analysis. The polyamides had inherent viscosities in the range 0.39-0.45 dL/g in N, N-dimethylacetamide at 30 +/- 0.1 A degrees C. The polyamides were soluble in polar aprotic solvents such as N, N-dimethylacetamide, N, N-dimethylformamide, dimethylsulfoxide, N-methylpyrrolidone. X-Ray diffraction studies showed that polyamides were amorphous in nature. The polyamides showed glass transition temperatures in the range 104-205 A degrees C, according to differential scanning calorimetry. Thermogravimetric analysis exhibited initial decomposition temperatures above 348 A degrees C; indicating that these polyamides possessed excellent thermal stability.

}, keywords = {polyamides, Quinoxaline, solubility, Thermal properties, XRD}, issn = {1022-9760}, doi = {10.1007/s10965-010-9448-7}, author = {Patil, Vidyadhar B. and Sayyed, Maheboob M. and Mahanwar, Prakash A. and Wadgaonkar, Prakash P. and Maldar, Noormahamad N.} } @article { ISI:000293849200017, title = {Poly(ether ether ketone)s and poly(ether ether ketone ketone)s containing cardo decahydronaphthalene groups: synthesis and characterization}, journal = {Journal of Applied Polymer Science}, volume = {122}, number = {3}, year = {2011}, month = {NOV}, pages = {1607-1613}, publisher = {WILEY-BLACKWELL}, address = {COMMERCE PLACE, 350 MAIN ST, MALDEN 02148, MA USA}, abstract = {

New poly(ether ether ketone)s and poly (ether ether ketone ketone) s were synthesized by polycondensation of each of the three bisphenols, viz., 4,4{\textquoteright}-(octahydro-2(1H)-naphthylidene) bisphenol, 4,4{\textquoteright}-(octa-hydro-2(1H)-naphthylidene) bis-3-methylphenol, and 4,4{\textquoteright}(octahydro-2(1H)-naphthylidene) bis-3,5-dimethylphenol with 4,4{\textquoteright}-difluorobenzophenone and 1,3-bis(4-fluorobenzoyl) benzene in a mixture of N,N-dimethylacetamide and toluene [1 : 1 (v/v)] in the presence of anhydrous potassium carbonate. Inherent viscosities of poly(ether ether ketone) s and poly (ether ether ketone ketone) s were in the range 0.32-0.80 dL/g and number-average molecular weights were in the range 16,100-55,900 g/mol. Poly(ether ether ketone) s and poly(ether ether ketone ketone) s were soluble in organic solvents such as dichloromethane, chloroform, tetrahydrofuran, meta-cresol, pyridine, and 1-methyl-2-pyrrolidinone at room temperature and could be cast into tough, transparent, and flexible films from their chloroform solutions. Wide angle x-ray diffraction measurements revealed the amorphous nature of poly(ether ether ketone) s and poly (ether ether ketone ketone) s. The glass transition temperature poly(ether ether ketone) s and poly(ether ether ketone ketone) s were in the range 185-251 degrees C. The temperature at 10\% weight loss, determined from thermogravimetric analysis, of poly(ether ether ketone) s and poly(ether ether ketone ketone) s in nitrogen atmosphere was in the range 462-493 degrees C indicating their good thermal stability. (C) 2011 Wiley Periodicals, Inc. J Appl Polym Sci 122: 1607-1613, 2011

}, keywords = {bisphenol, cardo decahydronaphthalene, poly(ether ether ketone ketone)s, poly(ether ether ketone)s, Polycondensation, Thermal properties}, issn = {0021-8995}, doi = {10.1002/app.33921}, author = {Honkhambe, Pandurang N. and Pasale, Sharad K. and Bhairamadgi, Nagendra S. and Kumbhar, Kishor P. and Salunkhe, Manikrao M. and Wadgaonkar, Prakash P.} } @article { ISI:000319610100003, title = {Synthesis and characterization of poly(ether ether ketone)s and poly(ether ether ketone ketone) s containing pendant biphenyl and naphthyl groups}, journal = {High Performance Polymers}, volume = {25}, number = {3}, year = {2013}, month = {MAY}, pages = {260-267}, publisher = {SAGE PUBLICATIONS LTD}, address = {1 OLIVERS YARD, 55 CITY ROAD, LONDON EC1Y 1SP, ENGLAND}, abstract = {

New poly(ether ether ketone)s (PEEKs) and poly(ether ether ketone ketone)s (PEEKKs) containing pendant biphenyl and naphthyl groups were synthesized by nucleophilic substitution reaction of each of the four bisphenols viz., 1-(4- biphenylyl)- 1,1- bis(4- hydroxyphenyl) ethane, 1-(4- biphenylyl)- 1,1- bis(3- methyl, 4- hydroxyphenyl) ethane, 4,4{\textquoteright}-[1-(2- naphthalenyl) ethylidene] bis-phenol and 4,4{\textquoteright}-[1-(2- naphthalenyl) ethylidene] bis-3-methylphenol with 4,4{\textquoteright}- difluorobenzophenone and 1,3- bis(4- fluorobenzoyl) benzene in a solvent mixture of N,N-dimethylacetamide and toluene in the presence of anhydrous potassium carbonate. Inherent viscosities and number-average molecular weights of polymers were in the range of 0.42-0.86 dl/g and 2.40-7.55 x 10(4), respectively. PEEKs and PEEKKs were amorphous in nature and were readily soluble in a wide range of organic solvents and could be cast into flexible and tough films from chloroform solution. Glass transition temperature of PEEKs and PEEKKs were in the range of 180 degrees C -200 degrees C. T-10 values of PEEKs and PEEKKs were in the range of 424 degrees C-512 degrees C in nitrogen atmosphere, indicating their good thermal stability.

}, keywords = {biphenyl, bisphenol, naphthyl, poly(ether ether ketone ketone)s, poly(ether ether ketone)s, Polycondensation, Thermal properties}, issn = {0954-0083}, doi = {10.1177/0954008312462731}, author = {Honkhambe, Pandurang N. and Dhamdhere, Neelam A. and Tawade, Bhausaheb V. and Salunkhe, Manikrao M. and Wadgaonkar, Prakash P.} } @article { ISI:000351153700001, title = {Processable aromatic polyesters based on bisphenol derived from cashew nut shell liquid: synthesis and characterization}, journal = {Journal of Polymer Research}, volume = {21}, number = {12}, year = {2014}, month = {NOV}, pages = {617}, publisher = {SPRINGER}, address = {VAN GODEWIJCKSTRAAT 30, 3311 GZ DORDRECHT, NETHERLANDS}, abstract = {

A new bisphenol viz., 4-(4-hydroxyphenoxy)-3-pentadecylphenol (HPPDP) was synthesized starting from cashew nut shell liquid (CNSL). Aromatic (co)polyesters containing ether linkages in the main chain and pendent pentadecyl chains were synthesized by the interfacial polycondensation of HPPDP with terephthalic acid chloride (TPC), isophthalic acid chloride (IPC) and a mixture of TPC and IPC (50: 50 mol \%) and by polycondenation of varying composition of HPPDP and bisphenol-A (BPA) with TPC. The resultant (co) polyesters exhibited inherent viscosities in the range 0.70-1.21 dL g(-1) and number-average molecular weights in the range 16,000-48,200 (GPC, polystyrene standard). Polyesters were soluble in common organic solvents such as chloroform and dichloromethane and could be cast into films from chloroform solution. Polyesters exhibited T-10 values in the range 430-455 degrees C and Tg values were in the range 29-202 degrees C. Dynamic mechanical storage modulus and maximum on transition of tan delta curve decreased with increased content of HPPDP in copolyesters. Importantly, the large difference between Tg and T-10 values offers the possibility to process these polyesters in the melt.

}, keywords = {Aromatic polyesters, Cashew nut shell liquid, pentadecyl, Polycondensation, processability, Thermal properties}, issn = {1022-9760}, doi = {10.1007/s10965-014-0617-y}, author = {Tawade, Bhausaheb V. and Salunke, Jagadish K. and Sane, Prakash S. and Wadgaonkar, Prakash P.} }