@article { ISI:000244210600007,
	title = {Poly(o-ethylaniline) coatings for stainless steel protection},
	journal = {Progress In Organic Coatings},
	volume = {58},
	number = {1},
	year = {2007},
	month = {JAN},
	pages = {54-63},
	publisher = {ELSEVIER SCIENCE SA},
	type = {Article},
	address = {PO BOX 564, 1001 LAUSANNE, SWITZERLAND},
	abstract = {<p>The poly(o-ethylaniline) coatings were electrochemically synthesized on 304-stainless steel by using cyclic voltammetry from an aqueous salicylate medium. Cyclic voltammetry, UV-vis absorption spectroscopy, Fourier transform infrared spectroscopy and scanning electron microscopy were used to characterize these coatings, which indicates that the aqueous salicylate solution is a suitable medium for the electrochemical polymerization of o-ethyaniline on 304-stainless steel. The performance of poly(o-ethylaniline) as protective coating against corrosion of 304-stainless steel in aqueous 3\% NaCl was evaluated by the open circuit potential measurements, potentiodynamic polarization technique, cyclic potentiodynamic polarization measurements and electrochemical impedance spectroscopy. The results of the potentiodynamic polarization and cyclic potentiodynamic polarization demonstrate that the poly(o-ethylaniline) coating provides excellent protection to both localized and general corrosion of 304-stainless steel. The corrosion potential was about 0.190 V more positive in aqueous 3\% NaCl for the poly(o-ethylaniline) coated steel than that of bare steel and reduces the corrosion rate of steel almost by a factor of 20. (c) 2006 Elsevier B.V. All rights reserved.</p>},
	keywords = {Conducting polymer coatings, Corrosion resistant coatings, cyclic voltammetry, Electrochemical polymerization, poly(o-ethylaniline) coatings, stainless steel},
	issn = {0300-9440},
	doi = {10.1016/j.porgcoat.2006.12.001},
	author = {Chaudhari, Sudeshna and Sainkar, S. R. and Patil, P. P.}
}
@article { ISI:000273175100013,
	title = {Synthesis and corrosion protection aspects of poly(o-toluidine)/CdO nanoparticle composite coatings on mild steel},
	journal = {Journal of Coatings Technology and Research},
	volume = {7},
	number = {1},
	year = {2010},
	month = {JAN},
	pages = {119-129},
	publisher = {SPRINGER},
	address = {233 SPRING ST, NEW YORK, NY 10013 USA},
	abstract = {<p>This study examines the possibility of using poly(o-toluidine)/CdO (POT-CdO) nanoparticle composite coating for corrosion protection of mild steel in chloride environment. The POT-CdO nanoparticle composite coating was synthesized on mild steel from aqueous tartrate solution containing CdO-nanoparticles (size similar to 18 nm) by using cyclic voltammetry. These coatings were characterized by cyclic voltammetry, UV-Visible absorption spectroscopy, Fourier transform infrared spectroscopy, scanning electron microscopy, and X-ray diffraction measurements. The corrosion protection aspects of the resulting POT-CdO nanocomposite structure were investigated in aqueous 3\% NaCl solution by potentiodynamic polarization technique and electrochemical impedance spectroscopy. The results of these investigations reveal that the POT-CdO nanoparticle composite acts as a protective coating on mild steel and reduces the corrosion rate of mild steel almost by factor of 70.</p>},
	keywords = {CdO, Conducting polymer coatings, Corrosion resistant coatings, cyclic voltammetry, Electrochemical polymerization, Mild steel, Nanocomposites, Poly(o-toluidine)},
	issn = {1547-0091},
	doi = {10.1007/s11998-008-9160-2},
	author = {Chaudhari, Sudeshna and Gaikwad, A. B. and Patil, P. P.}
}
