@article { ISI:000304155900025, title = {Latex-mediated synthesis of ZnS nanoparticles: green synthesis approach}, journal = {Journal of Nanoparticle Research}, volume = {14}, number = {5}, year = {2012}, month = {MAY}, pages = {865}, publisher = {SPRINGER}, address = {VAN GODEWIJCKSTRAAT 30, 3311 GZ DORDRECHT, NETHERLANDS}, abstract = {

A low-cost, green synthesis of ZnS nanoparticles is reported using 0.3 \% latex solution prepared from Jatropha curcas L. ZnS nanoparticles were characterized by X-ray diffraction, selected area electron diffraction, transmission electron microscopy, energy dispersive analysis of X-rays, UV-vis optical absorption and photoluminescence techniques. Fourier Transform Infrared Spectroscopy was performed to find the role of cyclic peptides namely curcacycline A (an octapeptide), curcacycline B (a nonapeptide) and curcain (an enzyme) as a possible reducing and stabilizing agents present in the latex of J. curcas L. The average size of ZnS nanoparticles was found to be 10 nm. Latex of J. curcas L. itself acts as a source of sulphide (S-2) ions that are donated to Zn ions under present experimental conditions. Source of sulphide (S-2) ions is still unclear, but we speculate that cysteine or thiol residues present in enzyme curcain may be donating these sulphide (S-2) ions.

}, keywords = {green synthesis, Latex, ZnS nanoparticles}, issn = {1388-0764}, doi = {10.1007/s11051-012-0865-x}, author = {Hudlikar, Manish and Joglekar, Shriram and Dhaygude, Mayur and Kodam, Kisan M.} } @article { ISI:000372759100036, title = {Amelioration of excision wounds by topical application of green synthesized, formulated silver and gold nanoparticles in albino Wistar rats}, journal = {Materials Science \& Engineering C-Materials for Biological Applications}, volume = {62}, year = {2016}, month = {MAY}, pages = {293-300}, publisher = {ELSEVIER SCIENCE BV}, address = {PO BOX 211, 1000 AE AMSTERDAM, NETHERLANDS}, abstract = {

Wound healing, a complex biological process, has attained a lot of attention as dermatologists are primarily interested in stimulated wound closure without formation of scar or a faint scar. The recent upsurgence of nanotechnology has provided novel therapeutic materials in the form of silver and gold nanoparticles which accelerate the wound healing process. The effect of formulated nanoparticles using Coleus forskohlii root extract (green synthesized) has been tried out for ameliorating full thickness excision wounds in albino Wistar male rats. The evaluation of in vivo activity of nanoparticles in wound healing was carried out on open wounds made by excision on the dorsal sides of albino Wistar rats under anesthesia, and the healing of the wounds was assessed. Histological aspects of the healing process were studied by a HE (Hematoxylin and Eosin) staining method to assess various degrees of re-epithelialization and the linear alignment of the granulation tissue whereas Van Gieson{\textquoteright}s histochemical staining was performed to observe collagen fibers. The healing action shown by the formulated nanoparticles was remarkable during the early stages of wound healing, which resulted in the substantial reduction of the whole healing period. Topical application of formulated gold nanoparticles was found to be more effective in suppressing inflammation and stimulating re-epithelialization compared to silver nanoparticles during the healing process. The results throw light on the amelioration of excision wounds using nanoparticles which could be a novel therapeutic way of improving wound healing in clinical practice. The mechanism of advanced healing action of both types of nanoparticles could be due to their antimicrobial, antioxidant and anti-inflammatory properties. (C) 2016 Elsevier B.V. All rights reserved.

}, keywords = {collagen, Gold, green synthesis, Nanopraticles, wound Healing}, issn = {0928-4931}, doi = {10.1016/j.msec.2016.01.069}, author = {Naraginti, Saraschandra and Kumari, P. Lakshmi and Das, Raunak Kumar and Sivakumar, A. and Patil, Sagar Hindurao and Andhalkar, Vaibhav Vilas} } @article { ISI:000381232100028, title = {Effect of different temperature on structural, magnetic and dielectric properties of strontium hexaferrite powder synthesised using aloe vera plant extracts}, journal = {Advanced Science Letters}, volume = {22}, number = {4, SI}, year = {2016}, note = {3rd International Conference on Nanotechnology, Pune, INDIA, OCT 14-15, 2014}, month = {APR}, pages = {869-875}, publisher = {AMER SCIENTIFIC PUBLISHERS}, address = {26650 THE OLD RD, STE 208, VALENCIA, CA 91381-0751 USA}, abstract = {

M-type SrFe12O19 hexaferrite particles synthesized using the aloe vera plant extract. Biological materials of microorganisms, plants, enzymes have been suggested as an ecological alternative for conventional reagents in physical and chemical methods. In present paper we report effect of temperature on structural, morphology, magnetic and dielectric properties of M-type SrFe12O19 particles synthesised by Green synthesis technique using Aloe vera plant extract. The metal nitrates (Sr and Fe) were dissolved in aloe vera extract solution and then mixture was kept in oil bath at 100 degrees C till it become dry. The obtain dried powder calcined in a wide temperature range, from 450 degrees C to 1150 degrees C for 4 hours in a static air atmosphere. The calcined powders were characterised using various instrumental techniques like Fourier transform infrared spectroscopy (FTIR) X-ray diffractometry (XRD), Scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), Vibrating Sample Magnetometry (VSM), and dielectric measurements. XRD, FTIR, SEM, Magnetic and dielectric measurements were carried out at room temperature. XRD analysis confirms the formation of mono phase of strontium hexaferrite at 1150 degrees C.

}, keywords = {Aloe Vera Extract, green synthesis, M-Type Hexaferrite, Strontium Hexaferrite}, issn = {1936-6612}, doi = {10.1166/asl.2016.6935}, author = {Solanki, Neha and Jotania, R. B. and Khomane, Ramdas B. and Kulkarni, B. D.} } @article { ISI:000365857100003, title = {Green synthesis of silver nanoparticles from purple acid phosphatase apoenzyme isolated from a new source limonia acidissima}, journal = {Journal of Experimental Nanoscience}, volume = {11}, number = {1}, year = {2016}, month = {JAN}, pages = {28-37}, publisher = {TAYLOR \& FRANCIS LTD}, address = {4 PARK SQUARE, MILTON PARK, ABINGDON OX14 4RN, OXON, ENGLAND}, abstract = {

Green synthesis of nanoparticles is regarded as a safe and non-toxic process whereas conventional synthesis using chemical methods produces toxic substance. This study provides a novel insight for enzymatic synthesis method of silver nanoparticles using purple acid phosphatase, isolated from Limonia acidissima (wood apple) as a new source and used in the synthesis of silver nanoparticles. Stable silver nanoparticles were produced by sonochemical method using apoenzyme as a stabilising and capping agent and were characterised by various physicochemical techniques like UV-Visible spectroscopy, Fourier-transform infrared, X-ray diffraction and transmission electron microscopy. X-ray study shows that nanoparticles are composed of silver and silver oxide. The synthesised nanoparticles exhibited excellent antimicrobial activity against Escherichia coli, Pseudomonas aeruginosa and Staphylococcus aureus.

}, keywords = {green synthesis, Limonia acidissima, purple acid phosphatase, silver nanoparticles}, issn = {1745-8080}, doi = {10.1080/17458080.2015.1025300}, author = {Pawar, Omkar and Deshpande, Neelima and Dagade, Sharda and Waghmode, Shobha and Joshi, Preeti Nigam} } @article { ISI:000380943900048, title = {Proton play in the formation of low molecular weight chitosan (LWCS) by hydrolyzing chitosan with a carbon based solid acid}, journal = {Carbohydrate Polymers}, volume = {151}, year = {2016}, month = {OCT}, pages = {417-425}, publisher = {ELSEVIER SCI LTD}, address = {THE BOULEVARD, LANGFORD LANE, KIDLINGTON, OXFORD OX5 1GB, OXON, ENGLAND}, abstract = {

Low molecular weight chitosan (LWCS) constitute a special class of value added chemicals that are primarily obtained from crustacean shells, which are the main water pollutants from crabs and shrimp processing centers. Unlike chitin and chitosan, LWCS possess improved solubility in water and aqueous solutions, making them widely applicable in numerous fields ranging from drug delivery to waste water treatment. Among the methods employed for their production, chemical breakdown by strong liquid acids has yielded good success. However, this method is met with severe concerns arising from the harsh nature of liquid acids, which may corrode the reactors for commercial synthesis, and their limited reusability. The physical methods like ultrasound and microwave are energy intensive in nature, while the enzymatic methods are expensive and offers limited scope for reuse. We have attempted to overcome these problems by employing carbon based solid acid (CSA) for hydrolyzing chitosan to LWCS. CSA can be easily produced using activated carbon, a cost-effective and easily available raw material. Reactions were carried out between chitosan and CSA in a hydrothermal glass reactor and the products, separated by cold centrifugation, were purified and dried. The dried products were characterized for their molecular weight and solubility. Results indicated more than ten-fold decrease in the molecular weight of chitosan and the product exhibited water solubility. The CSA could be used upto four times, without regeneration, to give a consistent quality product. The aqueous solution of resulting LWCS exhibited a pH of 6.03 +/- 0.11, as against the acidic pH range of solutions of commercially available LWCS, indicating its suitability for biomedical applications. Our investigation facilitates a {\textquoteleft}green approach{\textquoteright} that may be employed for commercial production of value added chemicals from waste products of marine industry. (C) 2016 Elsevier Ltd. All rights reserved.

}, keywords = {Carbon based solid acid, Chitosan, green synthesis, Hydrolysis, Low molecular weight chitosan}, issn = {0144-8617}, doi = {10.1016/j.carbpol.2016.05.082}, author = {Krishnan, R. Akhil and Deshmukh, Pranjal and Agarwal, Siddharth and Purohit, Poorvi and Dhoble, Deepa Arun and Waske, Prashant and Khandekar, Dileep and Jain, Ratnesh and Dandekar, Prajakta} } @article {43924, title = {Synthesis of copper nanoparticles in presence of surfactants and evaluation of heat transfer performance of copper nanofluid}, journal = {Journal of Nanofluids}, volume = {6}, year = {2017}, month = {APR}, pages = {334-342}, type = {Article}, abstract = {

Copper nanoparticles were synthesized by reduction of copper nitrate hexahydrate using glucose as a green reducing agent. Effect of various synthesis parameters such as the amount of reducing agent, type of surfactant, the concentration of surfactant on particle size and morphology has been studied. Particles thus synthesized were characterized using analytical tools like X-ray Diffraction (XRD), Dynamic Light Scattering (DLS) and Scanning Electron Microscopy (SEM). XRD results show copper peaks at 2 angles 43.34, 50.48 and 74.19{\textdegree} corresponding to the planes (111), (200) and (220) respectively and possessing FCC (Face Centred Cubic) crystal lattice and polydispersed particles with crystallite size ranging from 43 to 103 nm. Further Cu nanoparticles were dispersed in water to prepare nanofluid and heat transfer properties such as heat transfer coefficient, viscosity and density were evaluated. Nanofluid models proposed elsewhere were also used for theoretical property evaluations. Nearly 100\% increase in heat transfer coefficient was observed at 1\% (by volume) particle concentration of copper nanoparticles in water.

}, keywords = {Chemical Reduction, Copper nanoparticles, green synthesis, Nanofluids, surfactant}, issn = {2169-432X}, doi = {doi.org/10.1166/jon.2017.1316}, author = {Kapadnis, Chetan V. and Gundeli, Kartik P. and Saini, Daulat R. and Bhatkhande, Dhananjay S.} } @article {44660, title = {Synthesis of ecofriendly fluorescent carbon dots and their biomedical and environmental applications}, journal = {Materials Technology}, volume = {33}, year = {2018}, month = {JAN}, pages = {672-680}, abstract = {

Green Synthesis of nanoparticles is an emerging field with enormous advantages over conventional synthesis methods. Herein we have reported a green method for the preparation of water soluble polydisperse carbon dots (c-dots) from Cocos nucifera frond pinnae by a modified version of the {\textquoteleft}single step hydrothermal carbonization{\textquoteright}. C-dots having blue emission were obtained with this method and we further evaluated the effect of metal ions interactions on c-dots, as a sharp decrease in photoluminescence was observed. The synthesized c-dots were found bioactive against B.subtilis, M. smegmatis and S. aureus as determined by the well diffusion assay. We also explored nanotheranostic applications of c-dots as biosensor matrix in DNA hybridization sensor for pancreatic cancer and in bioimaging of cancer cells. This study demonstrated that c-dots can be explored for numerous biomedical and environmental applications in a variety of fields owing to the cost effective synthesis, biocompatibility and excellent physico-chemical properties.

}, keywords = {Carbon dots, differential pulse voltammetry, DNA hybridization sensor, green synthesis, Pancreatic Cancer}, issn = {1066-7857}, doi = {10.1080/10667857.2018.1492683}, author = {Joshi, Preeti Nigam and Mathias, Anjelica and Mishra, Abhishek} } @article {47582, title = {Catalytic applications of hydrotalcite and related materials in multi -component reactions: concepts, challenges and future scope}, journal = {Sustainable Chemistry and Pharmacy}, volume = {22}, year = {2021}, month = {SEP}, pages = {100458}, type = {Article}, abstract = {Hydrotalcites (HTs) are the potential substitute to conventional base catalysts. HTs are useful in efficient syntheses of various heterocycles, such as chromenes, pyrans, pyrazoles, triazoles, using multi-component reactions. This review focuses on the chemistry of HTs and particularly hydrotalcites and related materials in the synthesis of heterocycles. The effects of preparation method and, physico-chemical parameters, such as calcination, molar ratio of metals, role of intercalated ions, surface area, on the catalytic activities are discussed. Along with technical aspects, this review also unlocks various untouched areas in developing sustainable catalyst for syntheses of heterocycles, drugs, etc. for the future.}, keywords = {green chemistry, green synthesis, heterocycles, heterogeneous catalysis, hydrotalcite, Metal Oxide}, doi = {10.1016/j.scp.2021.100458}, author = {Burange, Anand S. and Gopinath, Chinnakonda S.} } @article {48395, title = {Green synthesis-mediated iron oxide nanoparticles using sphagneticola trilobata (L.) for antibacterial and anticancer assessment}, journal = {Pharmacognosy Magazine}, volume = {18}, year = {2022}, month = {OCT-DEC}, pages = {953-961}, type = {Article}, abstract = {

Background: Green chemistry is widely accepted phenomenon to synthesize iron oxide nanoparticles (Fe-NPs) used in several biomedical and technological applications. Metal oxide nanoparticles are useful in biomedical, clearing environmental pollutants, enzyme immobilization, etc., Objectives: The synthesis of Fe-NPs using Sphagneticola trilobata leaf extract using ferric chloride solution and its biological assessment. Materials and Methods: The present study involved the synthesis of Fe-NPs using S. trilobata leaf extract using ferric chloride solution by the co-precipitation method. The synthesized nanoparticles were characterized for Fourier-transform infrared spectroscopy, scanning electron microscopy, powder X-ray diffraction spectroscopy, particle size analysis, and magnetization studies. The nanoparticles were biologically evaluated for microbiological, antioxidant, and in vitro cytotoxicity activity. Results: Magnetic nanoparticles were appeared in dark brown color. The change in color might result due to the presence of polyphenols in S. trilobata leaf extract. The characterization studies confirmed morphology, shape, and size of the nanoparticles. The mean diameter of Fe-NPs and S. trilobata-Fe-NPs was found to be 42.2 +/- 2.6 and 62.54 +/- 2.01 nm, respectively. Magnetization studies of nanoparticles revealed ferromagnetic behavior with the saturation magnetization at 57 emugm(-1). S. trilobata-Fe-NPs showed significant antibacterial action against Staphylococcus aureus and Bacillus subtilis by the well-diffusion method. Antioxidant activity of S. trilobata-Fe-NPs exhibited 65.78\% inhibition in comparison with ascorbic acid. The cytotoxicity assay of S. trilobata-Fe-NPs on HCT-15 colon adenocarcinoma cells showed significant anticancer activity (56.44\%) cytotoxic inhibition. Conclusion: Green synthesis-mediated S. trilobata-Fe-NPs appeared to produce significant antimicrobial and anticancer potential.

}, keywords = {Elemental analysis, field emission scanning electron microscopy, green synthesis, iron oxide nanoparticles, Sphagneticola trilobata, X-ray diffraction}, issn = {0973-1296}, doi = {10.4103/pm.pm_356_21}, author = {Dhavale, Rakesh Pandit and Patil, Swapnil Sanjay and Jadhav, Sagar Ujwal and Dhavale, Rushikesh Pandit and Agawane, Sachin Bharat} } @article {48466, title = {Selective one pot multicomponent green synthesis of 3-[(aryl)(arylthio)methyl]-1H-indole derivatives utilizing enhanced Lewis acidic sites of Surfactant-assisted ZnO catalyst}, journal = {ChemistrySelect}, volume = {8}, year = {2023}, month = {MAY}, pages = {e202300736}, type = {Article}, abstract = {

Five different ZnO nanocrystallites (ZnO-1 to ZnO-5) were successfully synthesized by a surfactant-assisted hydrothermal technique using various surfactants. All the ZnO nanocrystallites are thoroughly characterized by XRD, IR, UV-DRS spectroscopy and FESEM-EDS analysis. Among the synthesized ZnO nanocrystallites, the CTAB-assisted synthesized ZnO-4 exhibited a fine disc-like morphology with a minimum crystallite size (23 nm). Subsequent to reaction optimization studies, the ZnO-4 is utilized as an efficient catalyst for one pot-three component green synthesis of 3-[(aryl)(arylthio)methyl]-1H-indoles (4a-4p) via. condensation of a variety of indoles, aromatic aldehydes and aromatic thiols at room temperature in water. The single-crystal X-ray structure of 3-[(phenyl)(phenylthio)methyl]-1H-indole (4a) is also been reported (CCDC 2170437). The Lewis acidic property of the catalyst-supported probable mechanism is well proposed subsequent to pyridine-IR studies of the ZnO catalysts. Indeed, CTAB-assisted synthesized ZnO-4 was found to be most effective and selective Lewis acid catalyst for the synthesis of a variety of 3-[(aryl)(arylthio)methyl]-1H-indole derivatives in water at ambient temperature with merits like higher yields, lower reaction time, catalyst recovery and reuse.

}, keywords = {3-[(aryl)(arylthio)methyl]-1H-indole, green synthesis, Lewis acidity, Single crystal, ZnO}, issn = {2365-6549}, doi = {10.1002/slct.202300736}, author = {Sangale, Vijay B. B. and Jagtap, Rohidas M. M. and Mali, Bhupendra P. P. and Gonnade, Rajesh G. G. and Pardeshi, Satish K. K.} } @article {49438, title = {Green one-pot three component synthesis of thiazolidine-2,4-dione based bisspirooxindolo-pyrrolidines with [Bmim]BF4: their in vitro and in silico anti-TB studies}, journal = {Molecular Diversity}, year = {2024}, month = {MAY}, type = {Article; Early Access}, abstract = {

A simple and effective three-component one-pot green methodology was employed for the synthesis of a new thiazolidine-2,4-dione based bisspirooxindolo-pyrrolidine derivatives using [Bmim]BF4 ionic liquid via [3 + 2] cycloaddition reaction. It is an environmentally benign, column chromatography-free, shorter reaction time, good yield and easy product isolation method. The synthesized compounds 10a-x, were thoroughly characterized by using various spectroscopic methods like FT-IR, H-1 NMR, C-13 NMR, Mass spectrometry and finally by single crystal X-ray diffraction method. In vitro anti-tubercular (anti-TB) activity studies were carried out on these synthesized compounds, and they showed good to moderate anti-TB activity against Mycobacterium tuberculosis H37Rv strain. The compound 10a exhibited good anti-TB activity, with an MIC (Minimum Inhibitory Concentration) value of 12.5 mu g/mL, and the compounds 10m, 10o and 10r showed moderate activity with an MIC value of 25.0 mu g/mL. Remaining compounds exhibited poor activity against Mycobacterium tuberculosis. Ethambutol, rifampicin and isoniazid were used as standard drugs. Furthermore, in silico molecular docking experiments on the TB protein (PDB ID: 1DF7) were carried out to understand the binding interactions, and they showed least binding energy values ranging from -8.9 to -7.2 kcal/mol.

}, keywords = {4-dione based bisspirooxindolo-pyrrolidines, Anti-TB activity, green synthesis, Molecular docking, Thiazolidine-2, [3+2] cycloaddition reaction, [Bmim]BF4}, issn = {1381-1991}, doi = {10.1007/s11030-024-10853-5}, author = {Rukyanaik, V. and Gamidi, Rama Krishna and Kumari, Jyothi and Sriram, Dharmarajan and Basavoju, Srinivas} } @article {49520, title = {Enhanced Production and Techno-Economic Analysis of Sustainable Biofuel Production via Continuous Hydrogenation of Furfural Using the Cu-ZnO-Al2O3 Catalyst}, journal = {ACS Sustainable Chemistry \& Engineering}, volume = {13}, year = {2025}, month = {FEB}, pages = {3183-3199}, type = {Review}, abstract = {

2-Methylfuran is a perfect green solution on the pathway of finding alternative fuels. We report here for the first time the continuous production of 2-methylfuran (2-MF), a sustainable biofuel from biomass-derived furfural (FFA), over an industrial Cu-ZnO-Al2O3 (CZA) catalyst. The modified coprecipitation method provides a uniformly dispersed crystalline structure to the synthesized catalysts, along with intended copper (Cu) loading achievement. Different Cu loadings affect the catalytic behavior and activity. Hence, CZA catalysts with two Cu loadings of 9.8 and 4.7\% were studied in detail, denoted as C1 and C2, respectively. The catalysts were characterized via XRD, N-2 adsorption, H-2-TPR, NH3-TPD, XPS, ICP-MS, and TEM. Remarkably, the prepared catalysts demonstrate balanced acid sites with mesopores, a high surface area and pore volume, and better controlled nanoparticle size promoting catalytic activity. TEM and H-2-TPR studies reveal a better Cu dispersion. Existence of Cu2+ and Cu (+) even after reduction by XPS study proves the efficiency of the synthesized catalysts. Furthermore, TGA indicates the stability of CZA catalysts. To understand catalytic activity and selectivity, the investigation was carried out in a packed-bed fixed-bed stainless steel reactor. Better physiochemical properties result in high FFA conversion of 33.8\% and selectivity of 99.6\% for 2-MF. No side products were formed during reaction otherwise improbable via the continuous method. Compared with available literature, the CZA catalyst was found to exhibit superior catalytic performance. The reaction kinetics of furfural hydrogenation to 2-methylfuran was investigated, and it was found that the reaction order is high, and the activation energy was 61.2 kJ/mol. The rate constant k clearly obeyed the Arrhenius law from 180 to 220 degrees C. In addition, evaluation of reaction kinetics also indicated the absence of ring hydrogenation and decarbonylation products, which is difficult to achieve. Finally, the process shows significant economic viability, which resulted in the minimum levelized production cost for 2-methylfuran of 173,068.16 \$/ton with 78.32\% overall energy efficiency.

}, keywords = {2-methylfuran (2-MF), continuous production, Cu-ZnO-Al2O3, economic viability, furfural, green synthesis}, issn = {2168-0485}, doi = {10.1021/acssuschemeng.4c08820}, author = {Saha, Biswajit and Racha, Arundhathi and Chaudhary, Puneet Kumar and Singh, Brijesh Kumar and Samanta, Chanchal and Newalkar, Bharat L.} }