02682nas a2200229 4500008004100000022001400041245010700055210006900162260000800231300001100239490000700250520191300257653001702170653001502187653001402202653001402216653002502230100002202255700002402277700002202301856012902323 2021 eng d a1350-417700aImproving efficiency for removal of ammoniacal nitrogen from wastewaters using hydrodynamic cavitation0 aImproving efficiency for removal of ammoniacal nitrogen from was cJAN a1053060 v703 a

The present study reports significant improvements in the removal of ammoniacal nitrogen from wastewater which is an important problem for many industries such as dyes and pigment, distilleries and fisheries. Pilot plant studies (capacity, 1 m(3)/h) on synthetic wastewater using 4-amino phenol as model nitrogen containing organic compound and two real industrial effluents of high ammoniacal nitrogen content were carried out using hydrodynamic cavitation. Two reactor geometries were evaluated for increased efficiency in removal-orifice and vortex diode. Effect of initial concentration (100-500 mg/L), effect of pressure drop (0.5-5 bar) and nature of cavitating device (linear and vortex flow for cavitation) were evaluated along with effect of salt content, effect of hydrogen peroxide addition and aeration. Initial concentration was found to have significant impact on the extent of removal: similar to 5 g/m(3) removal for initial concentration of 100 mg/L and up to 12 g/m(3) removal at high concentration of 500 mg/L. Interestingly, significant improvement of the order of magnitude (up to 8 times) in removal of ammoniacal nitrogen could be obtained by sparging air or oxygen in hydrodynamic cavitation and a very high removal of above 80% could be achieved. The removal of ammoniacal nitrogen by vortex diode was also found to be effective in the industrial wastewaters and results on two different effluent samples of distillery industry indicated up to 75% removal, though with longer time of treatment compared to that of synthetic wastewater. The developed methodology of hydrodynamic cavitation technology with aeration and vortex diode as a cavitating device was found to be highly effective for improving the efficiency of the conventional cavitation methods and hence can be highly useful in industrial wastewater treatment, specifically for the removal of ammoniacal nitrogen.

10aAmino phenol10aCavitation10aOxidation10apollution10aWastewater treatment1 aPatil, Pravin, B.1 aBhandari, Vinay, M.1 aRanade, Vivek, V. uhttp://library.ncl.res.in/content/improving-efficiency-removal-ammoniacal-nitrogen-wastewaters-using-hydrodynamic-cavitation02278nas a2200229 4500008004100000022001400041245011500055210006900170260000800239300001200247490000800259520149000267653002401757653001801781653001601799653001401815653002501829100002201854700002001876700002401896856012801920 2022 eng d a0263-876200aIntensified hydrodynamic cavitation using vortex flow based cavitating device for degradation of ciprofloxacin0 aIntensified hydrodynamic cavitation using vortex flow based cavi cNOV a623-6320 v1873 a

The present work, for the first time, establishes degradation behavior of ciprofloxacin (CIP), a widely used fluoroquinolone group of antibiotics, using vortex flow based hydro-dynamic cavitation (HC) for low to high concentrations of CIP (10 and 100 mg/L). Effect of pressure on the degradation of CIP and TOC reduction was investigated on pilot plant scale (capacity 1 m3/h). Process intensifications using aeration as well as hydrogen per-oxide (H2O2) were also investigated. While aeration did not yield any significant en-hancement, process intensification using H2O2 resulted in similar to 200% enhancement in the CIP degradation as compared to HC alone. Excellent degradations, to an extent of 79 & 95%, were achieved corresponding to high cavitational yields of 7.2 x 10-4 mg/J and 86.8 x 10-4 mg/J for CIP concentrations of 10 and 100 mg/L respectively using the process intensified approach of HC and H2O2, not reported so far for cavitating devices without moving ele-ments. The developed methodology demonstrated 4-7 times improvement in per-pass degradation and low cost with high efficiency compared to the conventional cavitation. The results clearly highlight utility of the process intensified approach using H2O2 for the degradation of CIP even at high concentrations, specifically important for pharmaceutical industries requiring zero liquid discharge norms.(c) 2022 Institution of Chemical Engineers. Published by Elsevier Ltd. All rights reserved.

10aAntibiotics removal10aciprofloxacin10aDegradation10aOxidation10aWastewater treatment1 aPatil, Pravin, B.1 aThanekar, Pooja1 aBhandari, Vinay, M. uhttp://library.ncl.res.in/content/intensified-hydrodynamic-cavitation-using-vortex-flow-based-cavitating-device-degradation02493nas a2200217 4500008004100000022001400041245010600055210006900161260000900230300001100239490000800250520173000258653002401988653002802012653001402040653002202054653002502076100002202101700002402123856012802147 2022 eng d a0301-479700aSolvent-assisted cavitation for enhanced removal of organic pollutants - degradation of 4-aminophenol0 aSolventassisted cavitation for enhanced removal of organic pollu cJUN  a1148570 v3113 a

A new approach of solvent-assisted cavitation process was proposed for degradation of organic pollutants. The process envisages the use of suitable solvent as an additive, (1-5% v/V), in the conventional cavitation process to enhance the pollutant removal efficiency. A proof of concept was provided for the removal of ammoniacal nitrogen with significantly improved efficiency using solvent-assisted hydrodynamic cavitation (HC) compared to conventional HC. The efficacy of the process was studied on a pilot plant scale (1 m(3)/h) and using vortex flow based vortex diode as a cavitating device. Degradation studies were carried out using a model pollutant, 4-amino phenol and four different solvents as additives, 1-octanol, cyclohexanol, 1-octane and toluene. Relatively polar solvents were found to increase the efficiency of the pollutant removal (> 65%) and also increase the rates to an extent of more than 200%, compared to only HC. A very high removal of ammoniacal nitrogen, more than 90%, was obtained for solvents 1-octanol and cyclohexanol, indicating the importance of the selection of solvent. Per pass degradation model showed 3 to 4 times increase in the per pass degradation for polar solvents compared to cavitation alone. The results confirm no role of conventional solvent extraction and no specific contamination of wastewater due to the use of solvent as an additive in the process. Further, the cost was 2-3 times lower as compared to the conventional HC. The interesting observations in the proposed process can fuel further research to provide possible improvements in existing methodologies of wastewater treatment, in general, and for removal of ammoniacal nitrogen, in particular.

10aAmmoniacal nitrogen10aHydrodynamic cavitation10aOxidation10aPollution Control10aWastewater treatment1 aPatil, Pravin, B.1 aBhandari, Vinay, M. uhttp://library.ncl.res.in/content/solvent-assisted-cavitation-enhanced-removal-organic-pollutants-degradation-4-aminophenol