02831nas a2200265 4500008004100000022001400041245012000055210006900175260000900244300001400253490000600267520190400273653002502177653001802202653001702220653003102237653003002268653002102298100002102319700002302340700003002363700001702393700002402410856013102434 2021 eng d a2574-096200aZinc-air batteries catalyzed using Co3O4 nanorod-supported N-doped entangled graphene for oxygen reduction reaction0 aZincair batteries catalyzed using Co3O4 nanorodsupported Ndoped  cMAY  a4570-45800 v43 a

The work reported here deals with the development of an efficient non-platinum electrocatalyst for electrochemical oxygen reduction reaction (ORR) through a sequential pathway involving hydrothermal treatment followed by freeze-drying to build the desired structural architecture of the catalyst. The designed catalyst (Co3O4/nitrogen-doped entangled porous 3D graphene (NEGF)), which contains Co3O4 nanorods anchored on the surface of three-dimensional (3D)-structured N-doped graphene, was found to display higher ORR activity during single-electrode testing and demonstrate a Zn-air battery (ZAB) system. Under the hydrothermal treatment at 180 degrees C, in the presence of ammonia, nitrogen was doped into the carbon framework of graphene, which subsequently formed a self-assembled entangled 3D structure of graphene after freeze-drying. The hydrothermal treatment and freeze-drying processes were found to play vital roles in tuning the morphological and structural features of the catalyst. The doped nitrogen, apart from its favorable contribution toward ORR, helped facilitate efficient dispersion of oxide nanorods on graphene. Co3O4/NEGF displayed remarkable ORR activity in 0.1 M KOH solution, as evident from the 60 mV onset potential shift compared to the state-of-the-art Pt/C catalyst and the Tafel slope value of 74 mV dec(-1) vs 68 mV dec(-1) for Pt/C. The ZAB fabricated by employing Co3O4/NEGF as the cathode catalyst was found to be an efficient competitor for the system based on the Pt/C cathode. This high performance has been credited to the controlled interplay of the governing factors such as the interfacial interactions leading to the efficient dispersion of metal oxide nanorods, increased catalyst surface area, the cooperative effect arising from the defects present in the N-doped porous 3D graphene, and the synergetic interactions operating in the system.

10acobalt-oxide nanorod10afreeze-drying10ahydrothermal10aN-doped entangled graphene10aoxygen reduction reaction10azinc-air battery1 aManna, Narugopal1 aSingh, Santosh, K.1 aKharabe, Geeta, Pandurang1 aTorris, Arun1 aKurungot, Sreekumar uhttp://library.ncl.res.in/content/zinc-air-batteries-catalyzed-using-co3o4-nanorod-supported-n-doped-entangled-graphene-oxygen02326nas a2200229 4500008004100000022001400041245016800055210006900223260000800292490000700300520143400307653003201741653003001773653002301803100001801826700001701844700002701861700004001888700001701928700002401945856012701969 2022 eng d a2194-428800aInfluence of ice templating on oxygen reduction catalytic activity of metal-free heteroatom-doped mesoporous carbon derived from polypyrrole for zinc-air batteries0 aInfluence of ice templating on oxygen reduction catalytic activi cDEC0 v103 a

The development of highly active, cost-effective, and durable, noble metal-free oxygen reduction electrocatalysts is inevitable for the full-fledged implementation of fuel cells and zinc-air batteries. This work reports the synthesis of heteroatom (N, P, S)-doped metal-free mesoporous carbon-based electrocatalyst derived from polypyrrole by combining the ice templating, freeze-drying, and carbonization processes. The correlation between the structure and electrochemical activity of the polypyrrole-derived carbon-based electrocatalyst in the presence and absence of ice templating is investigated. The optimized electrocatalyst, aided by the ice-templating and freeze-drying step, shows an onset and half-wave potential (E-1/2) of 0.94 and 0.78 V vs reversible hydrogen electrode, respectively, in an alkaline electrolyte (0.1 m KOH). Later, the application of the optimized electrocatalyst is demonstrated in a primary zinc-air battery (ZAB) cell. The results prove that the ZAB device performance based on the homemade catalyst is on par with that of the state-of-the-art Pt/C cathode. The catalyst performance is correlated with the heteroatom doping and the enhanced porosity of the sample benefitted from ice templating. Ultimately, this work depicts a facile and rational synthesis of a truly metal-free electrocatalyst for the primary ZABs that can be a potential replacement for state-of-the-art systems.

10ametal-free electrocatalysts10aoxygen reduction reaction10azinc-air batteries1 aKurian, Maria1 aGhosh, Meena1 aVijayakumar, Vidyanand1 aPuthiyaveetil, Priyanka, Pandinhare1 aTorris, Arun1 aKurungot, Sreekumar uhttp://library.ncl.res.in/content/influence-ice-templating-oxygen-reduction-catalytic-activity-metal-free-heteroatom-doped02682nas a2200217 4500008004100000022001400041245012900055210006900184260000800253490000600261520186200267653003002129653003002159653004302189100002402232700001802256700002802274700001702302700002402319856012102343 2024 eng d a2366-748600aAdvanced 3D network of N-doped graphitic carbon with FeNi alloy embedding for high-performance rechargeable Zn-air batteries0 aAdvanced 3D network of Ndoped graphitic carbon with FeNi alloy e cJUL0 v83 a

Despite the significant progress in Zn-air batteries (ZABs), their widespread use in the rechargeable sector is hindered due to the scarcity of efficient bifunctional oxygen catalysts that can catalyze both the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER). To address this, an ORR/OER bifunctional electrocatalyst is designed with ultrafine alloyed FeNi nanoparticles encapsulated in a 3D interconnected N- doped carbon network structure, featuring a carbon nitride backbone enclosed in graphitic carbon. The FeNi electrocatalyst (3DFeNiPDC) showed good bifunctional activity toward both ORR and OER in the basic medium with a low overpotential value of 30 mV for ORR and 6 mV for OER compared to its state-of-the-art counterparts Pt/C, and RuO2, respectively. Utilizing 3DFeNiPDC in a rechargeable Zn-air battery (RZAB) yields an open circuit voltage (OCV) of 1.35 V, a maximum power density of 232 mW cm-2, and an energy density of 707 W h kg-1. Additionally, a flexible RZAB employing 3DFeNiPDC demonstrates an OCV of 1.4 V with various bending angles. These finding suggest 3DFeNiPDC as a viable alternative to noble metal-based RZABs, offering superior bifunctional electrocatalytic activity and stability, particularly with its enhanced air-breathing properties facilitating improved operability under practical conditions. The bifunctional electrocatalytic activity of FeNi alloy nanoparticles embedded in a 3D- interconnected N-doped graphitic carbon (3DFeNiPDC) for both oxygen reduction and oxygen evolution is studied. The 3D architecture and core-shell characteristics of FeNi alloy nanoparticles provide better activity and stability for oxygen electrocatalysis. The electrocatalytic activity of 3DFeNiPDC has been exploited for liquid-state and solid-state flexible rechargeable zinc-air batteries. image

10aOxygen Evolution Reaction10aoxygen reduction reaction10arechargeable flexible zinc-air battery1 aPandikassala, Ajmal1 aKurian, Maria1 aGangadharan, Pranav, K.1 aTorris, Arun1 aKurungot, Sreekumar uhttp://library.ncl.res.in/content/advanced-3d-network-n-doped-graphitic-carbon-feni-alloy-embedding-high-performance