02746nas a2200217   4500008004100000022001400041245015700055210006900212260009800281300001200379490000700391520185900398653002002257653002602277653001902303653000902322653002302331100002502354700002302379856012602402       2008                        eng d  a0959-810300aThermal and mechanical properties of melt processed intercalated poly(methyl methacrylate)-organoclay nanocomposites over a wide range of filler loading0 aThermal and mechanical properties of melt processed intercalated  aTHE ATRIUM, SOUTHERN GATE, CHICHESTER PO19 8SQ, W SUSSEX, ENGLANDbJOHN WILEY & SONS LTDcMAY  a738-7430 v573 a<p>BACKGROUND: Poly(methyl methacrylate) (PMMA)-organoclay nanocomposites with octadecylammonium, ion-modified montmorillonite, prepared via melt processing, over a wide range of filler loading (2-16 wt%) were investigated in detail. These hybrids were characterized for their dispersion structure, and thermal and mechanical properties, such as tensile modulus (E). break stress (sigma(brk)), percent break strain (epsilon(brk)) and ductility(J), using wide-angle X-ray diffraction, transmission electron microscopy, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and tensile and impact tests. RESULTS: Intercalated nanocomposites were formed even in the presence of 16 wt% clay (high loading) in PMMA matrix. PMMA intercalated into the galleries of the organically modified clay, with a change in d-spacing in the range 11-16 angstrom. TGA results showed improved thermal stability of the nanocomposites. The glass transition temperature (T-g) of the nanocomposites, from DSC measurements, was 2-3 degrees C higher than that of PMMA. The ultimate tensile strength and impact strength decreased with increasing clay fraction. Tensile modulus for the nanocomposites increased by a significant amount (113%) at the highest level of clay fraction (16 wt%) studied. CONCLUSION: We show for the first time the formation of intercalated PMMA nanocomposites with alkylammonium-modified clays at high clay loadings (&gt; 15wt%). Tensile modulus increases linearly with clay fraction, and the enhancement in modulus is significant. A linear correlation between tensile strength and strainat-break is shown. Thermal properties are not affected appreciably. Organoclay can be dispersed well even at high clay fractions to form nanocomposites with superior bulk properties of practical interest. (c) 2007 Society of Chemical Industry.</p>10aimpact strength10amechanical properties10aNanocomposites10aPMMA10aThermal properties1 aTiwari, Rajkiran, R.1 aNatarajan, Upendra  uhttp://library.ncl.res.in/content/thermal-and-mechanical-properties-melt-processed-intercalated-polymethyl-methacrylate-002206nas a2200301   4500008004100000245012300041210006900164260000800233300000900241490000700250520125500257653001301512653002601525653002001551653001501571653000901586653001201595653002101607100001701628700001601645700001801661700001801679700001801697700001901715700002301734700002001757856012701777       2020                        eng d00aStudy of interfacial adhesion between nickel-titanium shape memory alloy and a polymer matrix by laser surface pattern0 aStudy of interfacial adhesion between nickeltitanium shape memor  cMAR  a21720 v103 a<p>The aim of this article is to investigate the interfacial adhesion of Ni-Ti shape memory alloy with a polymer matrix of Poly (methyl methacrylate) (PMMA). The surface pattern on Ni-Ti plates was channeled by a solid state laser machine. The laser machine allows for creating channels on the Ni-Ti surface for infiltration of the PMMA matrix, which could be attached as an intra-surface locking pattern to the Ni-Ti surface. The influence of the PMMA matrix on the surface of the NiTi plate was evaluated by thermomechanical analysis (TMA) and dynamic mechanical analysis (DMA). The surface characterization was carried out by an optical microscope on the PMMA/NiTi composite after mechanical testing. During mechanical testing, the polymer displays the multiple cracks in the longitudinal direction that result in slipping and fracture. TMA and DMA analyses were performed on the Ni-Ti- and PMMA-coated Ni-Ti ribbon to observe elasticity and the storage modulus for both samples. Better adhesion than 80 % was observed in the Ni-Ti surface, in the laser surface pattern, in comparison to the free plain surface. However, the polymer acts as mechanical backing that caused a reduction in the shape-memory properties of the composite material.</p>
10aadhesion10amechanical properties10aNiTi composites10aNiTi plate10aPMMA10aPolymer10asurface features1 aSamal, Sneha1 aTyc, Ondrej1 aHeller, Ludek1 aSittner, Petr1 aMalik, Monika1 aPoddar, Pankaj1 aCatauro, Michelina1 aBlanco, Ignazio  uhttp://library.ncl.res.in/content/study-interfacial-adhesion-between-nickel-titanium-shape-memory-alloy-and-polymer-matrix