biblio
, “Superprotonic conductivity in flexible porous covalent organic framework membranes”, Angewandte Chemie, vol. 57, no. 34, pp. 10894-10898, 2018.
, “Water mediated proton conductance in a hydrogen-bonded Ni(II)-bipyridine-glycoluril chloride self-assembled framework”, CrystEngComm, vol. 20, no. 8, pp. 1094-1100, 2018.
, “Water-in-acid gel polymer electrolyte realized through a phosphoric acid-enriched polyelectrolyte matrix toward solid-state supercapacitors”, ACS Sustainable Chemistry & Engineering, vol. 6, no. 10, pp. 12630-12640, 2018.
, “Activity tuning of cobalt ferrite nanoparticles anchored on N-doped reduced graphene oxide as a potential oxygen reduction electrocatalyst by Zn substitution in the spinel matrix”, Chemistry Select, vol. 2, no. 26, pp. 7845-7853, 2017.
, “Chitosan intercalated metal organic gel as a green precursor of fe entrenched and fe distributed N-doped mesoporous graphitic carbon for oxygen reduction reaction”, Chemistryselect, vol. 2, no. 28, pp. 8762-8770, 2017.
, “On demand electrochemical release of drugs from porous reduced graphene oxide modified flexible electrodes”, Journal of Materials Chemistry B, vol. 5, no. 32, pp. 6557-6565, 2017.
, “Enhanced proton conduction by post-synthetic covalent modification in a porous covalent framework”, Journal of Materials Chemistry A, vol. 5, no. 26, pp. 13659-13664, 2017.
, “Grafoil-scotch tape-derived highly conducting flexible substrate and its application as a supercapacitor electrode”, Nanoscale, vol. 9, no. 10, pp. 3593-3600, 2017.
, “High-level supercapacitive performance of chemically reduced graphene oxide”, Chem, vol. 3, no. 5, pp. 846-860, 2017.
, “Magnetic reduced graphene oxide loaded hydrogels: highly versatile and efficient adsorbents for dyes and selective Cr(VI) ions removal”, Journal of Colloid and Interface Science, vol. 507, pp. 360-369, 2017.
, “Nanocrystalline Fe-Fe2O3 particledeposited N-doped graphene as an activity-modulated Pt-free electrocatalyst for oxygen reduction reaction”, Nanoscale, vol. 9, no. 35, pp. 13341-13342, 2017.
, “Nitrogen-doped graphene anchored with mixed growth patterns of CuPt alloy nanoparticles as a highly efficient and durable electrocatalyst for the oxygen reduction reaction in an alkaline medium”, Nanoscale, vol. 9, no. 26, pp. 9009-9017, 2017.
, “Nitrogen-doped graphene with a three-dimensional architecture assisted by carbon nitride tetrapods as an efficient metal-free electrocatalyst for hydrogen evolution”, Chemelectrochem, vol. 4, no. 10, pp. 2643-2652, 2017.
, “NiZn double hydroxide nanosheet-anchored nitrogen-doped graphene enriched with the gamma-NiOOH phase as an activity modulated water oxidation electrocatalyst”, Nanoscale, vol. 9, no. 34, pp. 12590-12600, 2017.
, “ Porous reduced graphene oxide modified electrodes for the analysis of protein aggregation. part 1: lysozyme aggregation at pH 2 and 7.4”, Electrochimica Acta, vol. 254, pp. 375-383, 2017.
, “Proton conduction in a hydrogen-bonded complex of copper(II)-bipyridine glycoluril nitrate”, Dalton Transactions, vol. 46, no. 21, pp. 6968-6974, 2017.
, “Selective isolation and eradication of E. coli associated with urinary tract infections using anti-fimbrial modified magnetic reduced graphene oxide nanoheaters”, Journal of Materials Chemistry B, vol. 5, no. 40, pp. 8133-8142, 2017.
, “Single cell fabrication towards the realistic evaluation of a CNT-strung ZIF-derived electrocatalyst as a cathode material in alkaline fuel cells and metal-air batteries”, ChemElectroChem, vol. 4, no. 11, pp. 2928-2933, 2017.
, “Ultrahigh ionic conduction in water-stable close-packed metal-carbonate frameworks”, Inorganic Chemistry, vol. 56, no. 16, pp. 9710-9715, 2017.
, “1000-fold enhancement in proton conductivity of a MOF using post-synthetically anchored proton transporters”, Scientific Reports, vol. 6, p. 32489, 2016.
, “1D alignment of PEDOT in a buckypaper for high-performance solid supercapacitors”, Chemelectrochem, vol. 3, no. 9, pp. 1329-1336, 2016.
, “Cobalt-modified covalent organic framework as a robust wateroxidation electrocatalyst”, Chemistry of Materials, vol. 28, no. 12, pp. 4375-4379, 2016.
, “Conjugated porous polymers as precursors for electrocatalysts and storage electrode materials”, Chemical Communications, vol. 52, no. 2, pp. 316-318, 2016.
, “Coordination polymers of Fe(III) and Al(III) ions with TCA ligand: distinctive fluorescence, CO2 uptake, redox-activity and oxygen evolution reaction”, Dalton Transactions, vol. 45, no. 16, pp. 6901-6908, 2016.
, “Graphene oxide sheathed ZIF-8 microcrystals: engineered precursors of nitrogen-doped porous carbon for efficient oxygen reduction reaction (ORR) electrocatalysis”, ACS Applied Materials & Interfaces, vol. 8, no. 43, pp. 29373-29382, 2016.
, “High hydroxide conductivity in a chemically stable crystalline metal-organic framework containing a water-hydroxide supramolecular chain”, Chemical Communications, vol. 52, no. 54, pp. 8459-8462, 2016.
, “High-index faceted Au nanocrystals with highly controllable optical properties and electro-catalytic activity”, Nanoscale, vol. 8, no. 46, pp. 19224-19228, 2016.
, “High-Performance flexible solid-state supercapacitor with an extended nanoregime interface through in situ polymer electrolyte generation”, ACS Applied Materials & Interfaces, vol. 8, no. 2, pp. 1233-1241, 2016.
, “Hydrogen-bonded organic frameworks (HOFs): a new class of porous crystalline proton-conducting materials”, Angewandte Chemie-International Edition, vol. 55, no. 36, pp. 10667-10671, 2016.
, “Low band gap benzimidazole COF supported Ni3N as highly active OER catalyst”, Advanced Energy Materials, vol. 6, no. 24, p. Article No:1601189, 2016.
, “Low-overpotential electrocatalytic water splitting with noble-metal-free nanoparticles supported in a sp(3) n-rich flexible COF”, Advanced Energy Materials, vol. 6, no. 13, p. Article No. 1600110, 2016.
, “Mechanochemically synthesized covalent organic framework as a proton-conducting solid electrolyte”, Journal of Materials Chemistry A, vol. 4, no. 7, pp. 2682-2690, 2016.
, “Nanoporous graphene enriched with Fe/Co-N active sites as a promising oxygen reduction electrocatalyst for anion exchange membrane fuel cells”, Advanced Functional Materials, vol. 26, no. 13, pp. 2150-2162, 2016.
, “Nitrogen and sulphur co-doped crumbled graphene for the oxygen reduction reaction with improved activity and stability in acidic medium”, Journal of Materials Chemistry A, vol. 4, no. 16, pp. 6014-6020, 2016.
, “Pb2+-N bonding chemistry: recycling of polyaniline-pb nanocrystals waste for generating high-performance supercapacitor electrodes”, Journal of Physical Chemistry C, vol. 120, no. 2, pp. 911-918, 2016.
, “Pt- and TCO-free flexible cathode for DSSC from highly conducting and flexible PEDOT paper prepared via in situ interfacial polymerization”, ACS Applied Materials & Interfaces, vol. 8, no. 1, pp. 553-562, 2016.
, “Reduced graphene oxide modified electrodes for sensitive sensing of gliadin in food samples”, ACS Sensors, vol. 1, no. 12, pp. 1462-1470, 2016.
, “Strategic Preparation of Efficient and Durable NiCo Alloy Supported N-Doped Porous Graphene as an Oxygen Evolution Electrocatalyst: A Theoretical and Experimental Investigation”, Advanced Materials Interfaces, vol. 3, no. 20, p. 1600532, 2016.
, “Understanding the electron transfer process in ZnO-naphthol azobenzoic acid composites from photophysical characterisation”, Physical Chemistry Chemical Physics, vol. 18, no. 32, pp. 22179-22187, 2016.
, “Unravelling the mechanism of electrochemical degradation of PANI in supercapacitors: achieving a feasible solution”, Chemelectrochem, vol. 3, no. 6, pp. 933-942, 2016.
, “Valorization of coffee bean waste: a coffee bean waste derived multifunctional catalyst for photocatalytic hydrogen production and electrocatalytic oxygen reduction reactions”, RSC Advances, vol. 6, no. 85, pp. 82103-82111, 2016.
, “Vitro and in silico antifungal efficacy of nitrogen- doped carbon nanohorn ( NCNH) against rhizoctonia solani”, Journal of Biomolecular Structure & Dynamics, vol. 34, no. 1, pp. 152-162, 2016.
, “3D polyaniline porous layer anchored pillared graphene sheets: enhanced interface joined with high conductivity for better charge storage applications”, ACS Applied Materials & Interfaces, vol. 7, no. 14, pp. 7661-7669, 2015.
, “Can enantiomer ligands produce structurally distinct homochiral MOFs?”, CrystEngComm, vol. 17, no. 42, pp. 8202-8206, 2015.
, “Carbon nanohorn-derived graphene nanotubes as a platinum-free fuel cell cathode”, ACS Applied Materials & Interfaces, vol. 7, no. 43, pp. 24256-24264, 2015.
, “Coherent fusion of water array and protonated amine in a metal-sulfate-based coordination polymer for proton conduction”, Inorganic Chemistry, vol. 54, no. 11, pp. 5366-5371, 2015.
, “CoSe2 supported on nitrogen-doped carbon nanohorns as a methanol-tolerant cathode for air-breathing microlaminar flow fuel cells”, Chemelectrochem, vol. 2, no. 9, pp. 1339-1345, 2015.
, “Cu-Pt nanocage with 3-D electrocatalytic surface as an efficient oxygen reduction electrocatalyst for a primary Zn-air battery”, ACS Catalysis, vol. 5, no. 3, pp. 1445-1452, 2015.
, “Effect of b site coordination environment in the ORR activity in disordered brownmillerites Ba2In2-xCexO5+delta”, ACS Applied Materials & Interfaces, vol. 7, no. 5, pp. 3041-3049, 2015.
, “Electrochemical preparation of nitrogen-doped graphene quantum dots and their size-dependent electrocatalytic activity for oxygen reduction”, Bulletin of Materials Science, vol. 38, no. 2, pp. 435-442, 2015.
, “Fe(III) phytate metallogel as a prototype anhydrous, intermediate temperature proton conductor”, Chemical Science, vol. 6, no. 1, pp. 603-607, 2015.
, “Layer-separated MoS2 bearing reduced graphene oxide formed by an in situ intercalation-cum-anchoring route mediated by Co(OH)(2) as a Pt-free electrocatalyst for oxygen reduction”, Nanoscale, vol. 7, no. 40, pp. 16729-16736, 2015.
, “Lithium-assisted proton conduction at 150 degrees C in a microporous triazine-phenol polymer”, Advanced Materials Interfaces, vol. 2, no. 16, p. 1500301, 2015.
, “Low surface energy plane exposed co3o4 nanocubes supported on nitrogen-doped graphene as an electrocatalyst for efficient water oxidation”, ACS Applied Materials & Interfaces, vol. 7, no. 1, pp. 442-451, 2015.
, “Nanocrystalline Fe-Fe2O3 particle-deposited N-doped graphene as an activity-modulated Pt-free electrocatalyst for oxygen reduction reaction”, Nanoscale, vol. 7, no. 47, pp. 20117-20125, 2015.
, “Nitrogen-induced surface area and conductivity modulation of carbon nanohorn and its function as an efficient metal-free oxygen reduction electrocatalyst for anion-exchange membrane fuel cells”, SMALL, vol. 11, no. 3, pp. 352-360, 2015.
, “Surface-modified single wall carbon nanohorn as an effective electrocatalyst for platinum-free fuel cell cathodes”, Journal of Materials Chemistry A, vol. 3, no. 8, pp. 4361-4367, 2015.
, “Surface-tuned Co3O4 nanoparticles dispersed on nitrogen-doped graphene as an efficient cathode electrocatalyst for mechanical rechargeable zinc-air battery application”, ACS Applied Materials & Interfaces, vol. 7, no. 38, pp. 21138-21149, 2015.
, “Switching closed-shell to open-shell phenalenyl: toward designing electroactive materials”, Journal of the American Chemical Society, vol. 137, no. 18, pp. 5955-5960, 2015.
, “Activated nitrogen doped graphene shell towards electrochemical oxygen reduction reaction by its encapsulation on Au nanoparticle (Au@N-Gr) in water-in-oil ``nanoreactors''”, Journal of Materials Chemistry A, vol. 2, no. 5, pp. 1383-1390, 2014.
, “All-solid-state-supercapacitor and a process for the fabrication thereof”, U.S. Patent PCT/IN2014/0002332014.
, “Covalent organic framework-cadmium sulfide hybrid as a prototype photocatalyst for visible-light-driven hydrogen production”, Chemistry A-European Journal, vol. 20, no. 48, pp. 15961-15965, 2014.
, “Distinctive PdCl2-mediated transformation of Fe-based metallogels into metal-organic frameworks”, Crystal Growth & Design, vol. 14, no. 7, pp. 3434-3437, 2014.
, “Electrochemically grown nanoporous MnO2 nanowalls on a porous carbon substrate with enhanced capacitance through faster ionic and electrical mobility”, Chemical Communications, vol. 50, no. 54, pp. 7188-7190, 2014.
, “Electrodeposited polyethylenedioxythiophene with infiltrated gel electrolyte interface: a close contest of an all-solid-state supercapacitor with its liquid-state counterpart”, Nanoscale, vol. 6, no. 11, pp. 5944-5952, 2014.
, “Enhanced catalytic activity of polyethylenedioxythiophene towards tri-iodide reduction in DSSCs via 1-dimensional alignment using hollow carbon nanofibers”, Nanoscale, vol. 6, no. 17, pp. 10332-10339, 2014.
, “From waste paper basket to solid state and Li-HEC ultracapacitor electrodes: a value added journey for shredded office paper”, Small, vol. 10, no. 21, pp. 4395-4402, 2014.
, “Layer-separated distribution of nitrogen doped graphene by wrapping on carbon nitride tetrapods for enhanced oxygen reduction reactions in acidic medium”, Chemical Communications, vol. 50, no. 89, pp. 13769-13772, 2014.
, “Nanoporous graphene by quantum dots removal from graphene and its conversion to a potential oxygen reduction electrocatalyst via nitrogen doping”, Energy & Environmental Science, vol. 7, no. 7, pp. 1059-1067, 2014.
, “Nitrogen-doped graphene interpenetrated 3D Ni-nanocages: efficient and stable water-to-dioxygen electrocatalysts”, Nanoscale, vol. 6, no. 21, pp. 13179-13187, 2014.
, “Post modification of MOF derived carbon via g-C3N4 entrapment for an efficient metal-free oxygen reduction reaction”, Chemical Communications, vol. 50, no. 25, pp. 3363-3366, 2014.
, “Post-synthetically modified porous covalent framework (PCF) for high proton conduction”, Acta Crystallographica A‐Foundation and Advances, vol. 70, p. C1156, 2014.
, “Structure and dynamics of benzyl-NX3 (X = Me, Et) trifluoromethanesulfonate ionic liquids”, Journal of Physical Chemistry B, vol. 118, no. 7, pp. 1831-1838, 2014.
, “Synthesis of an efficient heteroatom-doped carbon electro-catalyst for oxygen reduction reaction by pyrolysis of protein-rich pulse flour cooked with SiO2 nanoparticles”, Physical Chemistry Chemical Physics, vol. 16, no. 9, pp. 4251-4259, 2014.
, “Two-in-one: inherent anhydrous and water-assisted high proton conduction in a 3D metal-organic framework”, Angewandte Chemie-International Edition, vol. 53, no. 10, pp. 2638-2642, 2014.
, “1-Dimensional confinement of porous polyethylenedioxythiophene using carbon nanofibers as a solid template: an efficient charge storage material with improved capacitance retention and cycle stability”, RSC Advances, vol. 3, no. 29, pp. 11877-11887, 2013.
, “3-Dimensionally self-assembled single crystalline platinum nanostructures on few-layer graphene as an efficient oxygen reduction electrocatalyst”, RSC Advances, vol. 3, no. 19, pp. 6913-6921, 2013.
, “Carbon nanofiber-RuO2-poly(benzimidazole) ternary hybrids for improved supercapacitor performance”, RSC Advances, vol. 3, no. 7, pp. 2428-2436, 2013.
, “Design of a high performance thin all-solid-state supercapacitor mimicking the active interface of its liquid-state counterpart”, ACS Applied Materials & Interfaces, vol. 5, no. 24, pp. 13397-13404, 2013.
, “Effect of the viscosity of poly(benzimidazole) on the performance of a multifunctional electrocatalyst with an ideal interfacial structure”, Journal of Materials Chemistry A, vol. 1, no. 13, pp. 4265-4276, 2013.
, “Porous carbons from nonporous MOFs: influence of ligand characteristics on intrinsic properties of end carbon”, Crystal Growth & Design, vol. 13, no. 10, pp. 4195-4199, 2013.
, “Porous-organic-framework-templated nitrogen-rich porous carbon as a more proficient electrocatalyst than Pt/C for the electrochemical reduction of oxygen”, Chemistry-A European Journal, vol. 19, no. 3, pp. 974-980, 2013.
, “Redox-mediated synthesis of functionalised graphene: a strategy towards 2D multifunctional electrocatalysts for energy conversion applications”, ChemPlusChem, vol. 78, no. 10, pp. 1296-1303, 2013.
, “Zeolitic imidazolate framework (ZIF)-derived, hollow-core, nitrogen-doped carbon nanostructures for oxygen-reduction reactions in PEFCs”, Chemistry-A European Journal, vol. 19, no. 28, pp. 9335-9342, 2013.
, “3D Hexaporous carbon assembled from single-layer graphene as high performance supercapacitor”, Chemsuschem, vol. 5, no. 11, pp. 2159-2164, 2012.
, “Activity modulated low platium content oxygen reduction electrocatalysts prepared by inducing nano-order dislocations on carbon nanofiber through N-2-doping”, Journal of Physical Chemistry C, vol. 116, no. 28, pp. 14754-14763, 2012.
, “Efficient oxygen reduction electrocatalyst from graphene by simultaneously generating pores and nitrogen doped active sites”, Journal of Materials Chemistry, vol. 22, no. 45, pp. 23799-23805, 2012.
, “Graphene enriched with pyrrolic coordination of the doped nitrogen as an efficient metal-free electrocatalyst for oxygen reduction”, Journal of Materials Chemistry, vol. 22, no. 44, pp. 23506-23513, 2012.
, “Hydrous RuO2-carbon nanofiber electrodes with high mass and electrode-specific capacitance for efficient energy storage”, Nanoscale, vol. 4, no. 3, pp. 890-896, 2012.
, “One-dimensional confinement of a nanosized metal organic framework in carbon nanofibers for improved gas adsorption”, Chemical Communications, vol. 48, no. 14, pp. 2009-2011, 2012.
, “Polybenzimidazole mediated N-doping along the inner and outer surfaces of a carbon nanofiber and its oxygen reduction properties”, Journal of Materials Chemistry, vol. 22, no. 44, pp. 23668-23679, 2012.
, “Tuning the functionality of a carbon nanofiber-Pt-RuO2 system from charge storage to electrocatalysis”, Inorganic Chemistry, vol. 51, no. 18, pp. 9766-9774, 2012.
, “Tuning the performance of low-Pt polymer electrolyte membrane fuel cell electrodes derived from Fe2O3@Pt/C core-shell catalyst prepared by an in situ anchoring strategy”, Journal of Physical Chemistry C, vol. 116, no. 13, pp. 7318-7326, 2012.
, “Enhanced electrocatalytic performance of functionalized carbon nanotube electrodes for oxygen reduction in proton exchange membrane fuel cells”, Physical Chemistry Chemical Physics, vol. 13, no. 21, pp. 10312-10317, 2011.
, “Ex-situ dispersion of core-shell nanoparticles of Cu-Pt on an in situ modified carbon surface and their enhanced electrocatalytic activities”, Chemical Communications, vol. 47, no. 13, pp. 3951-3953, 2011.
, “Facile construction of non-precious iron nitride-doped carbon nanofibers as cathode electrocatalysts for proton exchange membrane fuel cells”, Chemical Communications, vol. 47, no. 10, pp. 2910-2912, 2011.
, “Highly exposed and activity modulated sandwich type Pt thin layer catalyst with enhanced utilization”, Journal of Materials Chemistry, vol. 21, no. 47, pp. 19039-19048, 2011.
, “Improved performance of phosphonated carbon nanotube-polybenzimidazole composite membranes in proton exchange membrane fuel cells”, Journal of Materials Chemistry, vol. 21, no. 20, pp. 7223-7231, 2011.
, “Artificially designed membranes using phosphonated multiwall carbon nanotube-polybenzimidazole composites for polymer electrolyte fuel cells”, Journal of Physical Chemistry Letters, vol. 1, no. 14, pp. 2109-2113, 2010.
, “High aspect ratio nanoscale multifunctional materials derived from hollow carbon nanofiber by polymer insertion and metal decoration”, Chemical Communications, vol. 46, no. 30, pp. 5590-5592, 2010.